SEND AN ENQUIRY

IMYH

UNASIS Cam Follower and Yoke Roller Bearings are designed and manufactured to the highest possible quality. These bearings offer an economic solution to industry standard principle dimensions, so they are interchangeable and readily available. Improvements have been made so you can enjoy better performance and a longer operating life.

 

The IMCH range has a full complement needle arrangement along with heavy duty cylindrical rollers for added load capacity.

 

Please review the product table below to find the best bearing for your application. If you require further assistance, please reach out to our bearing engineers for tailored support. 

Product Details

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
35 IMCH-35-SB 35 18 16 32.5 17 M16X1.5 8 3 6
40 IMCH-40-SB 40 20 18 36.5 19 M18X1.5 8 3 6
47 IMCH-47-SB 47 24 20 40.5 21 M20X1.5 9 4 8
52 IMCH-52-SB 52 24 20 40.5 21 M20X1.5 9 4 8
62 IMCH-62-SB 62 29 24 49.5 25 M24X1.5 11 4 8
72 IMCH-72-SB 72 29 24 49.5 25 M24X1.5 11 4 8
80 IMCH-80-SB 80 35 30 63 32 M30X1.5 15 4 8
90 IMCH-90-SB 90 35 30 63 32 M30X1.5 15 4 8

*The standard UNASIS metric cam-follower comes with hexagonal head port, seals and crowned outer roller diameter.                                        
*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. IMCH-62-X and IMCH-62-SBX, please refer to the part numbering section.    

 

Size Sealed Bearing Part Number  Corner  Radius Clamping Torque Max Speed -Grease Speed - Oil Dynamic Load Rating Static Load Rating Mass
mm   mm Nm rpm rpm N N kg
35 IMCH-35-SB 0.6 57 6500 8500 23000 27000 0.165
40 IMCH-40-SB 1 85 5500 7200 25000 31000 0.242
47 IMCH-47-SB 1 118 4200 5500 38000 48000 0.38
52 IMCH-52-SB 1 118 3400 4400 42000 57000 0.45
62 IMCH-62-SB 1 216 2600 3400 58000 76000 0.795
72 IMCH-72-SB 1.1 216 2100 2700 64000 8900 1.01
80 IMCH-80-SB 1.1 441 1800 2300 94000 129000 1.54
90 IMCH-90-SB 1.1 441 1800 2300 94000 129000 1.96

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only.                                  
*Clamping torque is based on dry threads only. If the threads are lubricated, use half the values shown.                                
                                            

Ask a Question?

Please get in touch with our Sales Engineers to discuss your technical requirements.

Get In Touch

Send An Enquiry

First Name*
Last Name*
Email*
Telephone
Company
Territory*
Message*
I want to receive latest news, product updates, discounts & offers from Carter Manufacturing via:

Choose your Location: